خردکن چوب Stiler RĘBAK TARCOWY CIĄGNIKOWY 25CM BX 92R, TRACTOR WOOD CHIPPER 25CM جدید

STILER BX 92R wood chipper.

The STILER BX92R wood chipper is used for chopping branches, tree trunks up to 25 cm in diameter, with roots up to 30 cm.

A newer reinforced model.

EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!
Technical data:

    Model: BX92R
    The size of the material being crushed: 25 cm in diameter
    Drive system: Drive from tractor engine transmitted by PTO
    Minimum tractor power: 50 hp
    Rotor size: 835 mm
    Rotor thickness: 30 mm
    Number of cutting knives: 4 + 1 counterblade
    Knife type: Hardened tool steel CR12
    Material feeding mechanism: Tractor hydraulic drive - 2 gears
    Mounting system: Three-point suspension system (three-point linkage)
    Dimensions (with folded hopper): 167 cm D X 173 cm S X 228 cm W
    Batch hopper: 50 x 50 cm
    Rotation range of the ejection tube: 360 °
    The height of the ejection tube: 152cm
    Nominal revolutions per minute / Nominal revolutions: 540-1000
    Chipper weight: 780 kg

Included:

    Chopper
    PTO power take off
    4 cutting knives and 1 counter knife

Specification:

    The material collecting system consists of two hydraulically driven cogged shafts.
    The material retrieval mechanism has a 10-step speed controller and a material dispensing function.
    The hydraulic system drive comes from the tractor's hydraulic outlets (fastening to quick couplings)
    The chipper has a massive disc with a diameter of 835 mm and a thickness of 30 mm.
    There are 4 cutting blades on both sides, sharpened 318 mm x 100 mm.
    In addition, the shield shield is secured against a knife.
    The construction of the rotor allows for long-term work without loading the tractor.
    All bearings protected against dust, stripping, etc. are lubricated by easily accessible calendars.
    On the disc there are also breakers (shovels) shredding the obtained framework to the value of 20-60 mm.
    The chipper with a three-point linkage (TUZ) is designed for cooperation with a farm tractor with a minimum power of 50 km.
    The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut in the event of too much load on the machine and disconnects the direct drive.
    The chipper is additionally equipped with shield ventilation.
    The set also includes PTO PTO shaft
    The generated chips are thrown by a tube rotated by 360 ° in relation to the chipper's base.
    The chips obtained have dimensions from 20mm to 60mm.

The massive shield and 4 blades on both sides sharpened guarantee the machine a long service life and very high efficiency in material crushing (up to 25 cm).

The back of the shield has been equipped with breakers and shovels for more efficient ejection of chips from the machine

The machine has two hydraulic feeding rollers. They accelerate work and make it easier to feed branches to the target. In addition, the machine has 10 feed speeds and reverse gear for branch retraction.

The revolutions are transmitted through a power take-off shaft where we connect the machine directly to the tractor shaft. The minimum required rotational speed is 540 rpm.

The machine is equipped with a three-point linkage suspension system.

The 360 ​​° rotary blast allows you to direct the stream in any direction.

The folded hopper facilitates the transport of the machine and its subsequent operation.

For free we give a power take-off (PTO).

In addition, you can buy an extension of the funnel 50 cm. For more information, please contact us by phone.